In very large or complex composite parts, it is often necessary to make a complete ply layer out of two or more pieces of material. When two or more pieces are used to form a ply layer, the pieces must be positioned so that they will bond together during curing to form a continuous layer in the finished part. The area where these pieces are joined together is called a splice.
Estimated completion time (hours): 0.8
Objectives
By the end of this course, you will be able to do the following:
- Define and identify the use of a butt splice
- Define and identify the use of an overlap splice
- List common requirements of a butt splice
- List common requirements of an overlap splice
- List common requirements for staggering splices
Estimated Time (Hrs): 0.8
Language: English