Check and adjust the countersink depth by creating several practice countersinks in scrap material of the same composition and thickness as the assembly.
Estimated completion time (hours): 1.4
Objectives
By the end of this course, you will be able to do the following:
- Choose an appropriate piece of scrap material
- Determine hole locations on a scrap part
- Countersink a hole
- Use a Federal gauge to inspect a countersink
- Install a flush head rivet
- Use a Federal gauge to inspect a flush head rivet
- Adjust the depth of a countersink cutter
Estimated Time (Hrs): 1.4
Language: English